Cisco Aironet 2702i Controller-based - Radio access point - 802.11ac (draft 5.0) - Wi-Fi - Dual Band
|
Product Specification
- Product Code
- 3174049
- Manufacturer Ref
- AIR-CAP2702I-C-K9
- Barcode
- 882658622274
- Brand
- Cisco
- Type
- Wireless Access Point
Product Details
- Cisco Aironet 2702i Controller-based - Radio access point - 802.11ac (draft 5.0) - Wi-Fi - Dual Band
The Aironet 2700 series supports 802.11ac "Wave 1" in its first implementation, providing a theoretical connection rate of up to 1.3 Gbps. That's roughly triple the rates offered by today's high-end 802.11n APs. The boost helps you stay ahead of the performance and bandwidth expectations of today's mobile worker, who usually uses multiple Wi-Fi devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has outpaced Ethernet as the default enterprise access network.
Building on the Cisco Aironet heritage of RF excellence, the 2700 series APs run on a purpose-built, innovative chipset with a best-in-class RF architecture. This chipset provides a high-density experience for enterprise networks designed for mission-critical, high-performance applications.
- Cross-AP noise reduction
Cross-AP noise reduction, a Cisco innovation enables APs to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance. - Optimized AP roaming
Optimized AP roaming ensures that client devices associate with the AP in their coverage range that offers the fastest data rate available. - Cisco ClientLink 3.0 technology
Cisco ClientLink 3.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. At the same time, the technology improves battery life on mobile devices. - Cisco CleanAir technology
Cisco CleanAir technology enhanced with 80 MHz channel support. CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems due to wireless interference. - MIMO equalization
MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade.
Specifications
General | |
---|---|
Device Type | Radio access point |
Width | 22.1 cm |
Depth | 22.1 cm |
Height | 5.1 cm |
Weight | 1 kg |
Processor / Memory / Storage | |
RAM | 512 MB |
Flash Memory | 64 MB |
Networking | |
Form Factor | External |
Connectivity Technology | Wireless |
Data Transfer Rate | 450 Mbps |
Line Coding Format | CCK |
Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac (draft 5.0) |
Frequency Band | 2.4 GHz, 5 GHz |
Status Indicators | Status |
Features | Auto-sensing per device, power over Ethernet (PoE), DFS support, Wi-Fi Multimedia (WMM) support, CleanAir technology, Maximum Ratio Combining (MRC), ClientLink 2.0 technology, 3T4R MIMO technology, cyclic shift diversity (CSD) |
Encryption Algorithm | AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2 |
Authentication Method | MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST |
Compliant Standards | IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11h, IEEE 802.11n, IEEE 802.11ac (draft 5.0) |
Aerial | |
Antenna | Internal |
Directivity | Omni-directional |
Gain Level | 4 dBi |
Expansion / Connectivity | |
Interfaces | 2 x 1000Base-T - RJ-45 ¦ 1 x management - RJ-45 |
Miscellaneous | |
Compliant Standards | VCCI, ICES-003, EN 300.328, EN 301.489.1, EN 301.489.17, FCC Part 15.247, OET 65 C, RSS-210, RSS-102, EMC, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, EN 301.893, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, EN50155, CAN/CSA C22.2 No. 60950-1, EMI, Directive 93/42/EEC |
Power | |
Power Over Ethernet (PoE) Supported | PoE |
Power Consumption Operational | 15 Watt |
Manufacturer Warranty | |
Service & Support | Limited warranty - advance parts replacement - lifetime - response time: 10 days |
Environmental Parameters | |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 10 - 90% (non-condensing) |