Tenon FINESSE Double Glazed Demountable Partitioning System
Tenon Finesse is a demountable and relocatable modular partition system that is ideal for general office areas. Quick and easy to install, it provides a cost effective solution for a wide range of locations and uses. Clip fit conversion sections make Finesse compatible with both single and double glazed Tenon Crystal. Constructed from a range of aluminium upright posts, steel sections and vinyl faced plasterboard, it is available in both single and double glazed format and can accommodate venetian blinds.
Versatility
Tenon Finesse is a fully demountable and re-locatable multi-purpose aluminium partition system that is simple and quick to install. Finesse is based on a module width of 1200mm, offering the flexibility to allow changes in layout whilst minimising wastage. The options available, not only in construction methods but also with section, panel, door type and joint details, make it ideal for a variety of locations. The system is constructed using aluminium channel and upright sections and galvanised steel framing sections, together with plastic glazing profiles. Solid construction is achieved with the use of plasterboard faced with a choice of vinyl wall covering.
Flexibility
Solid Finesse is available as a 75mm or 100mm partition. One or two layers of the specified panels can be fitted to provide the level of fire, sound or structural performance required. Panel options include square edge plasterboard for use with a choice of trim sections, tapered edge boards to provide a monolithic finish or bevelled edge boards to create a feature joint. Panels can be supplied pre-decorated with a choice of wall coverings or fabricated with laminate or steel facings. Glazed Finesse is supplied with 75mm sections only accommodating single and double glazing and integral Venetian blinds where necessary. Standard module width for both solid and glazed construction is 1200mm with a maximum construction height of 3600mm. Doors are available in natural wood finishes including White Oak, Ash, Cherry, Maple, Beech and can include a variety of vision panel shapes and sizes. To compliment Finesse, the Tenon range of ironmongery offers a wide choice of door furniture and accessories
Performance
75mm Finesse has been tested to BS476 part 22 and offers 30 minutes fire resistance in glazed, solid and door elevations. 100mm Finesse provides 60 minutes fire resistance in solid elevations only. When acoustic performance is a consideration the system can provide sound attenuation values of up to 51dB (RW) under laboratory test conditions. All aluminium profiles are available in a range of standard colours and may be powder coated in RAL or BS colours to match any corporate colour scheme. Finesse is durable and flexible in application. Designed for use in general office areas.
Arrange a callback or Tel: 08445 443558
|
More Items To Consider
Product Specification
- Product Code
- H44067202
- Brand
- Tenon
Product Details
- Tenon FINESSE Double Glazed Demountable Partitioning System
Tenon Finesse Double Glazed Demountable Partitioning System
Tenon Finesse is a demountable and relocatable modular partition system that is ideal for general office areas. Quick and easy to install, it provides a cost effective solution for a wide range of locations and uses. Clip fit conversion sections make Finesse compatible with both single and double glazed Tenon Crystal. Constructed from a range of aluminium upright posts, steel sections and vinyl faced plasterboard, it is available in both single and double glazed format and can accommodate venetian blinds.
Versatility
Tenon Finesse is a fully demountable and re-locatable multi-purpose aluminium partition system that is simple and quick to install. Finesse is based on a module width of 1200mm, offering the flexibility to allow changes in layout whilst minimising wastage. The options available, not only in construction methods but also with section, panel, door type and joint details, make it ideal for a variety of locations. The system is constructed using aluminium channel and upright sections and galvanised steel framing sections, together with plastic glazing profiles. Solid construction is achieved with the use of plasterboard faced with a choice of vinyl wall covering.
Flexibility
Solid Finesse is available as a 75mm or 100mm partition. One or two layers of the specified panels can be fitted to provide the level of fire, sound or structural performance required. Panel options include square edge plasterboard for use with a choice of trim sections, tapered edge boards to provide a monolithic finish or bevelled edge boards to create a feature joint. Panels can be supplied pre-decorated with a choice of wall coverings or fabricated with laminate or steel facings. Glazed Finesse is supplied with 75mm sections only accommodating single and double glazing and integral Venetian blinds where necessary. Standard module width for both solid and glazed construction is 1200mm with a maximum construction height of 3600mm. Doors are available in natural wood finishes including White Oak, Ash, Cherry, Maple, Beech and can include a variety of vision panel shapes and sizes. To compliment Finesse, the Tenon range of ironmongery offers a wide choice of door furniture and accessories
Performance
75mm Finesse has been tested to BS476 part 22 and offers 30 minutes fire resistance in glazed, solid and door elevations. 100mm Finesse provides 60 minutes fire resistance in solid elevations only. When acoustic performance is a consideration the system can provide sound attenuation values of up to 51dB (RW) under laboratory test conditions. All aluminium profiles are available in a range of standard colours and may be powder coated in RAL or BS colours to match any corporate colour scheme. Finesse is durable and flexible in application. Designed for use in general office areas.
Fire and acoustic performance
Module | Fire Performance | Acoustic Performance |
---|---|---|
Solid Modules | Up to 60min fire rating | Standard construction - up to 51 dB (Rw) |
Glazed Modules |
30 Min fire rated glazing | Standard construction - up to 38 dB (Rw) |
Door Modules | Solid core doors can provide 30 min fire rating | Standard solid core door - up to 30 dB(Rw) |
Construction Options
Solid modules - standard construction from plasterboard faced with vinyl.
Glazed modules - all elevation types incorporating centre single, offset single and double glazing and Venetian blinds.
Door modules - standard frames are fitted with 2040 x 826mm doors. Frames will also accept most door types including glass.
Max Construction Heights
Solid modules - standard construction - up to 3600mm.
Glazed modules - maximum recommended height using standard sections - 3000mm