NETGEAR M4200 Intelligent Edge Series GSM4210P - Switch - L3 - Managed - 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ - rack-mountable - PoE+ (240 W)
|
Frequently Bought Together
1. Vision Techconnect - Network cable - RJ-45 (M) to RJ-45 (M) - 3 m - UTP - CAT 6 - booted - white |
Product Specification
- Product Code
- 3802512
- Manufacturer Ref
- GSM4210P-100NES
- Barcode
- 606449111286
- No of Ports
- 8 Ports
- Brand
- Netgear
Product Details
- NETGEAR M4200 Intelligent Edge Series GSM4210P - Switch - L3 - Managed - 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ - rack-mountable - PoE+ (240 W)
The NETGEAR ProSAFE M4200-10MG-PoE+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points. Includes eight full power PoE+ and multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points. NETGEAR Multigigabit Ethernet is compatible with most major wireless and switching vendors managed solutions, and the only one with 8x2.5G to the AP and 2x10G line-rate aggregation to the wiring closet. Plenum rated, slim design and mounting accessories allow for access point placement optimization and cabling efficiency.
Specifications
| General | |
|---|---|
| Device Type | Switch - 10 ports - L3 - Managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ |
| Power Over Ethernet (PoE) | PoE+ |
| PoE Budget | 240 W |
| Performance | Switching capacity: 90 Gbps ¦ Throughput: 66.9 Mpps |
| MAC Address Table Size | 16K entries |
| Routing Protocol | RIP, static IPv4 routing, static IPv6 routing, MLD |
| Remote Management Protocol | SNMP, RMON, Telnet, HTTPS, SSH, CLI |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS+ |
| Features | DHCP support, VLAN support, IGMP snooping, Rapid Spanning Tree Protocol (RSTP) support, MLD snooping, side to side airflow, 16MB packet buffer |
| Compliant Standards | IEEE 802.3ad (LACP), IEEE 802.1AX |
| Processor | : 800 MHz |
| RAM | 1 GB |
| Flash Memory | 256 MB |
| Expansion / Connectivity | |
| Interfaces | 1 x management (Gigabit LAN) 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 ¦ 1 x serial (console) RJ-45 ¦ 1 x console (mini-USB) ¦ 1 x USB ¦ 6 x 1/2.5G (PoE+) RJ-45 ¦ 2 x 1/2.5G/5G (PoE+) RJ-45 ¦ 2 x 10GBase-X SFP+ ¦ 1 x USB Type A |
| Power | |
| Power Device | Internal power supply |
| Voltage Required | AC 120/230 V |
| Power Consumption Operational | 286.1 Watt |
| Miscellaneous | |
| Rack Mounting Kit | Included |
| Localisation | Europe, Americas |
| Software / System Requirements | |
| Software Included | Drivers & Utilities |
| Manufacturer Warranty | |
| Service & Support | NETGEAR lifetime warranty |
Product Reviews
View Expert Product Reviews reviews submitted by industry experts
View Customer Product Reviews reviews submitted by regular visitors who have used this product
