Hand Truck 3-in-1 PU Wheel/Castors Red Capacity 400Kg 372147

This heavy duty 3-in-1 truck is a great addition in any workplace, it has an impressive capacity of 400kg so it’s able to hold your items with ease. This hand truck can also be used as a platform truck or a 45 degree barrow so it’s versatile and easy to use. This product has 200mm diameter wheels and two swivel castors with precision bearings for ease of movement when transporting your items using the truck. With a weight of 29kg this product is easy to pick up and move if needed. You also have the choice of two different types of tyres with this heavy duty 3-in-1 truck, foam filled tyres or polyurethane tyres.

		Trolley Type- 3 in 1Truck Folding trolleys, stair trolleys, cylinder trolleys, sack trucks and even 2 or 3 way trolleys, there is a type of hand truck to meet every need. This truck is designed to converts quickly & easily into three types of truck.
		Steel Trolley When choosing a trolley, you need to decide what material will best suit your needs: steel frame aor lightweight aluminium. Manufactured from durable steel construction this truck is simple to operate, durable material for long lasting use.
		Trolley Colour Red colour 3 in 1 trolley. Powder coated finish.
		Trolley Capacity As you would expect, Trolleys are designed and constructed to safely hold a specific amount of weight borne by a person and any load they are carrying. This truck has maximum load of 400kg for transporting heavy goods.
		Trolley Weight This 3 in 1 trolley weights 29kg.
		Foam Filled Tyred Wheels Fitted with 200mm diameter Foam filled wheels and two swivel castors with precision bearings for ease of movement when transporting your items using the truck
		Platform Size; Footiron Size Constructed Platform Length: 1100mm Footiron Length: 195mm

 

Safety Trolley Tips

PERSONAL PROTECTIVE EQUIPMENT 

-Gloves that increase ability to grip cases.Footwear with protective toe and midsole.

 BEST PRACTICES

-For large quantity loads provide a four-wheel platform-style cart or a two-wheel hand truck that converts to a four-wheel platform-style truck.This will minimize bending the torso. Use a two-wheel truck with an adjustable toe plate – adjust the toe plate to approximately knee height to minimize torso bending. Keep your body centered between the side rails of the ladder at all times.

INCLINES

-When pushing up an incline the employee frequently has to lower the angle of the load to generate enough force to push the load upthe slope. Lowering the load angle increases the amount of weight the employee must lift. In addition to providing force in a horizontal direction, the employee must now provide force in a vertical direction. This places additional stress on the shoulders, back and legs. Provide a fold down third wheel on the backof the hand truck so the load can be selfsupporting. This ensures that the employee must only provide force in a horizontal direction. 

KERBS AND STAIRS

-Employees who deliver to locations without docks must pull fully loaded hand trucks over uneven walking surfaces, up and over curbs and up stairways. Provide and use kerb ramps. Kerb ramps allow for easy movement over uneven walking surfaces eliminating the need to lift and pull fully loaded hand trucks. -Use trucks that have several doors on the side so loads can be accessed by means other than the back door. A short ramp from a side door could eliminate pulling the hand cart up steps and kerbs. 

 MAINTENANCE

-A poorly maintained hand truck will greatlyincrease physical stress on an employee. When hand truck tires are under or unevenly pressurized, the employee's arms, back, and legs must provide more force to move the hand truck. Keep balloon tires in good repair and properly inflated. Check tire pressure on a quarterly basis or more often if needed. Make available to the employees a pressure gauge, air compressor, and pressure hose. Hard rubber tires do not have the air pressure problems associated with balloon tires. However, hard rubber tires do not move very well over rough terrain.