Butane Propane Cylinder Trolley For 15Kg Butane And 13Kg 19Kg Propane Cylinders Puncture Proof

Unique double sided trolleys, fitted with two hooks on which the cylinders are carried. For moving cylinders about the workplace and designed to be left attached to the cylinder in use.
Cylinder stability is not impaired as no part of the trolley goes underneath the cylinder base ring. On 260mm dia. puncture proof, micro-cellular polyurethane tyred wheels. Hooks for 15kg butane and 13kg/19kg propane cylinders.

		Trolley Type- Cylinder Trolley  Folding trolleys, stair trolleys, cylinder trolleys and even 2 or 3 way trolleys, there is a type of hand truck to meet every need. This cylinder trolley is designed with two hooks on each sides, these are to carry cylinders.
		Zinc Plated Trolley When choosing a trolley, you need to decide what material will best suit your needs: steel frame, lightweight aluminium or zinc plated finish. Zinc plating provides increased corrosion resistance, prolongs the life of the metal and improves the aesthetic value.
		Trolley Colour Zinc plated characteristics include an increase in corrosion resistance. By zinc plating metal, it prolongs the life of the basis metal improves aesthetic value of the part and serves as a good paint base.
		Trolley Weight This trolley weights 8kg.
		Trolley Capacity As you would expect, Trolleys are designed and constructed to safely hold a specific amount of weight borne by a person and any load they are carrying. For 15kg butane and 13kg/19kg propane cylinders.
		Puncture Proof Tyred Wheels High quality puncture proof micro-cellular polyurethane tyred. 260mm wheel Diameter.

 

Safety Trolley Tips

PERSONAL PROTECTIVE EQUIPMENT 

-Gloves that increase ability to grip cases.Footwear with protective toe and midsole.

 BEST PRACTICES

-For large quantity loads provide a four-wheel platform-style cart or a two-wheel hand truck that converts to a four-wheel platform-style truck.This will minimize bending the torso. Use a two-wheel truck with an adjustable toe plate – adjust the toe plate to approximately knee height to minimize torso bending. Keep your body centered between the side rails of the ladder at all times.

INCLINES

-When pushing up an incline the employee frequently has to lower the angle of the load to generate enough force to push the load upthe slope. Lowering the load angle increases the amount of weight the employee must lift. In addition to providing force in a horizontal direction, the employee must now provide force in a vertical direction. This places additional stress on the shoulders, back and legs. Provide a fold down third wheel on the backof the hand truck so the load can be selfsupporting. This ensures that the employee must only provide force in a horizontal direction. 

KERBS AND STAIRS

-Employees who deliver to locations without docks must pull fully loaded hand trucks over uneven walking surfaces, up and over curbs and up stairways. Provide and use kerb ramps. Kerb ramps allow for easy movement over uneven walking surfaces eliminating the need to lift and pull fully loaded hand trucks. -Use trucks that have several doors on the side so loads can be accessed by means other than the back door. A short ramp from a side door could eliminate pulling the hand cart up steps and kerbs. 

 MAINTENANCE

-A poorly maintained hand truck will greatlyincrease physical stress on an employee. When hand truck tires are under or unevenly pressurized, the employee's arms, back, and legs must provide more force to move the hand truck. Keep balloon tires in good repair and properly inflated. Check tire pressure on a quarterly basis or more often if needed. Make available to the employees a pressure gauge, air compressor, and pressure hose. Hard rubber tires do not have the air pressure problems associated with balloon tires. However, hard rubber tires do not move very well over rough terrain.